Changing KCAPV 8

Changing unit for emergency drinking water supply KCAPv 8


  • volume 8.000 l
  • stainless steel materiál with the certificate of the chief hygienist
  • wall thickness of the tank and lid 4 mm
  • flexible mounted on the subframe
  • inspection manhole DN 500 on the top of the tank, secured against unauthorized opening
  • handling ladder at the inspection manhole, from the tubes upwards
  • 2x breakwater inside the tank
  • indication of water tank filling with scale located behind the cabin with a possibility to control from operator´s place
  • overflow from the tank under the vehicle as overfill protection
  • storage tubs on both sides of the tank, stainless steel, lockable, insulated, tempered by independent heating in the width of the cabin
  • orange warning beacon on the rear top side of the tank
  • dividing walls inside the storage tubs
  • a 3“ draining tap is located in the lowest part of the tank

Tank filling:

  • down filling from hydrant by the fire quick coupling „B“, located as close as possible to the door
  • filling line also serves to drain the tank by gravity

Water distribution:

  • from the dispensing place with three 1“ ball valves, located in the lockable stainless steel box as close as possible to the door
  • distribution box is insulated and tempered by independent heating, for work with reduced visibility, the box is equipped with lighting of controls and a 12V socket for a portable worklight
  • by pressure line with quick coupling „C“ using a distribution pump
  • pump power max. 800 l/min, discharge height up to 80 m
  • pump is made of stainless steel material with food attestation
  • pump is operated from the driver´s place
  • distribution pump, water distribution and tank are equipped with drain holes in the lowest part, which serve for complete drainage of the system

Insulation of the tank and distribution:

  • insulation of distributions, dispensing places and storage tubs is dimensioned so that the functionality of the superstructure is guaranteed at a temperature of up to – 10 ° C for at least 24 hours

Colour design:

  • acrylic painting in RAL shade


  • mandatory equipment according to the decree
  • 3x distribution hoses in the length of 1m
  • holders for hydrant extension and wrench
  • 1x filling fire hose 10m