2-axle trailer with suction tank CAS 2
Trailer:
- 2-axle, technical load capacity 3.500 kg ( weight in the technical certificate could be 2.500 kg )
- drawbar to „V“ with ISO 50 ball
- spare wheel
- steel, hot-dip galvanized frame with preparation for superstructure mounting, without floor
- mechanical inertia brake
- support wheel, wedge, wiring
- including technical certificate
Tank:
- steel tank 2 m3 – usable volume approx. 1,8 m³
- firmly attached on the chassis
- design of the tank as a non-pressure container
- detachable breakwater
- manually operated closing valve DN 80
- terminal for suction hoses DN 80
- float level indicator enabling monitoring of the level in the tank
- upper inspection manhole DN 500, rear cleaning flange DN 300
Vacuum pump:
- vacuum pump JUROP PNR 82
- max. suction power 490 m3/hod
- suction line with float, filter + silencer + oil separator from the pump exhaust
- glycerin manovakuometer,
- manually operated 4-way valve
- double protection against overflow – primary and secondary float closure
- reverse valve
- possibility to fully drain the tank and lines
Vacuum pump drive:
- Drive by an independent engine located in the front part of the trailer
- The engine drives a hydraulic circuit, which ensures smooth running and the necessary speed transmission, and also replaces the clutch
- switching on the pump via a three-way tap
- Sufficiently dimensioned circuit for heavier use
Accessories:
- Hooks for suction hoses storage
- Lighting of the rear structure part and control iterms
- Lockable plastic tool box
- 4x suction hoses DN 80, l = 2,5 m
Colour design (acrylic painting):
- structure shade according to RAL
- galvanized subframe with protective varnish
Documents:
- safety and securing elements of the structure according to the relevant standards
- operating and maintenance instructions of the structure
- operating and maintenance instructions of the vacuum pump
- approval of the vehicle and superstructure for road traffic
- declaration of conformity
